K&H Lectro-Soft Heated Pet Bed – Medium

$69.99

  • The market’s only soft outdoor heated pet bed!
  • Excellent for use in the home, garage, porch, kennel or pet house
  • Internal thermostats heat to the standard body temperature of dogs and cats
  • Includes a super-soft removable cover
  • 5.5 ft. steel-wrapped cord
  • Size: Medium
  • Warranty: 1 year
  • Patented

5 in stock

UPC: 65519901806 SKU: 53870 Categories: , Tag: Brand:

Description

Are you looking for a versatile heated dog or cat bed? Well, the search is over! The K&H Lectro-Soft Heated Bed is the first soft, indoor OR outdoor heated pet bed on the market. Whether your dogs or cats live inside or outside, they will love the warmth this bed provides.

Place the Lectro-Soft almost anywhere–in a dog or cat house, kennel, basement, living room, garage, barn, shed, porch or any outdoor shelter. This soft, orthopedic heated pet bed provides dogs and cats with warmth and comfort, even in sub-zero weather. When in use, the internal thermostat is set to maintain a surface temperature that’s ideal for your pet. The soft PVC exterior protects from water or those occasional “accidents” that happen with older pets.

The Lectro-Soft Outdoor Heated Bed uses little wattage and is energy efficient. It’s also MET listed for safety and includes a one year warranty. It doesn’t get much better than that! Oh wait, it does get better. A free faux fleece cover is included with the bed.

Print Friendly, PDF & Email
Please follow and like us:
error

Additional information

Weight 3.1 lbs
Dimensions 20 × 10 × 2.5 in

Specifications

Item #
  • 1080 – Medium
Unit UPC
  • 1080 – Medium – 655199010806
Dimensions
  • Medium – 19″ L x 24″ W x 1.5″ H
Item Weight
  • Medium – 3.0 lbs.
Wattage
  • Medium – 40 watts
Cord Length 5.5 ft.
Safety Listing MET
Warranty 1 Year

Print Friendly, PDF & Email
Please follow and like us:
error

Care and Instructions

Usage Instructions

1Place the Lectro-Soft™ directly on a hard, flat surface in your home or inside a doghouse or kennel. The area chosen should be sheltered from direct rain or snow.

2Pull out the air valve on the bottom side of the bed. Plug into 110-120 volt AC outlet while the air valve is still released. Allow 15 to 30 minutes for the Lectro-Soft™ to begin to warm and fully expand. The unit will feel slightly warm to the touch.

3After desired expansion, push down on the center of the bed to remove a little air. Then push in the air plug to seal the bed. This will prevent a ballooning effect when your pet is enjoying the bed.

4After initial warm-up, your Lectro-Soft™ will feel cooler to the touch. This is the intention for energy efficiency. When your pet lies on the bed, it will warm to a comfortable temperature in even the coldest of weather.

The Lectro-Soft Outdoor Heated Bed does not inflate, as many people believe. After opening the air valve, you will not notice a big difference in size, but the bed will expand slightly.

All the air is removed from a Lectro-Soft bed when vacuum packaging it for shipment. Opening the air valve allows air back into the bed, which helps the inner foam gradually expand to its original size. This process can take up to 24 hours, depending on how long the bed has been vacuum packed.

Washing Icon

Cleaning Instructions

Wash the faux fleece cover on the gentle cycle with cold water, then line dry.

The bed can be cleaned using a damp towel or sponge and mild dish washing detergent. DO NOT wash in a washing machine.

Testing Your Lectro-Soft

You can test the bed by placing a large pillow on top of it. After about 20 minutes, feel under the pillow. It will feel warm, not hot. DO NOT use an extension cord during this test. DO NOT place anything on the pad (other than the fleece cover provided) any other time. This should only be done during testing.

Print Friendly, PDF & Email
Please follow and like us:
error

Products Q&A

Product-Specific Questions

 

Why is there an air valve on the Lectro-Soft Outdoor Heated Bed and how do I use it?

The Lectro-Soft Outdoor Heated Bed does not inflate, as many people believe. After opening the air valve, you will not notice a big difference in size, but the bed will expand slightly.

All the air is removed from a Lectro-Soft bed when vacuum packaging it for shipment. Opening the air valve allows air back into the bed, which helps the inner foam gradually expand to its original size. This process can take up to 24 hours, depending on how long the bed has been vacuum packed.

Can I bend or fold the Lectro-Soft to make it fit my pet’s house?

The Lectro-Soft should not be bent or folded. We only recommend placing it on a flat, stable surface.

Does the Lectro-Soft use a lot of energy when plugged in? I’m worried about high electricity costs.

Depending on size, the Lectro-Soft only uses only 20, 40, or 60 watts. It’s an energy efficient product that consumes very little electricity.

What material is the Lectro-Soft Cover made of?

The top is a soft faux fleece while the bottom is made of an open weave fabric that allows the heat to pass through.


General Questions about Outdoor Heated Beds

 

What temperature will an outdoor heated bed or pad reach?

K&H outdoor beds and pads are designed to warm to your pet’s normal body temperature of 102°F when he/she lies on the bed or pad. When your pet is not on the bed or pad, the heat will dissipate into the air and the surface temperature will vary according to the ambient air temperature.

Are your heated beds and pads pressure sensitive?

Our beds and pads are NOT pressure sensitive. All K&H heated beds and pads feature dual thermostats and are designed to warm to your pet’s normal body temperature when he/she lies on the pad. This is a function of the insulation provided by a pet’s body, not the weight of the pet.

K&H beds and pads will emit heat anytime they are plugged in so your pet can sense that heat and be drawn to the bed or pad for warmth and comfort. When your pet is not on the pad, the heat will dissipate into the air and the surface temperature will vary according to the ambient air temperature.

I see that each size has a different wattage. How does that translate to the actual heating temperature?

All of our heated products are thermostatically controlled to heat to 102°F, regardless of the size. The variation in wattage is directly related to the size and the wattage necessary to heat that size bed to 102°F.

How long is the cord?

The cord is 5.5 feet long.

Can I use an extension cord with this product?

MET requires that all manufacturers put the extension cord statement “Do not use with extension cord” on every item that is MET listed by UL 499 standards. This is because they cannot test every extension cord on the market in conjunction with our products for safety. Also, MET suggests that an extension cord is not recommended as a permanent fixture and should only be a temporary solution when using any electrical product.

Temporary use of a UL listed cord is fine, but consult your electrician for the proper cord for your application. For more information on MET safety testing, please visit their website at www.metlabs.com.

How long can a heated bed or pad be plugged in?

MET Safety Laboratories suggests unplugging the bed if you leave your home on an extended vacation, as they do with any electrical appliance. Otherwise, it is designed for 24/7 operation and you can leave it plugged in all day. This item has been certified by MET labs to adhere to strict electrical safety standards. For more information, please visit www.metlabs.com.

Is there an off/on switch?

There is not an off/on switch. The pad is always on when plugged in.

Is placing an additional blanket or towel on top of the heated bed or pad recommended?

You never want to place anything on top of a K&H outdoor bed or pad other than the cover provided. This cover allows the warmth to go through whereas a blanket or any other cover will trap the heat inside the bed or pad, possibly causing a malfunction.

Can you place an outdoor heated bed or pad on top of another pet bed or blanket for extra cushioning?

Outdoor heated pet beds and pads should be placed on a flat, stable surface rather than on top of a bed or blanket.

Are K&H outdoor heated beds and pads waterproof?

Our outdoor heated beds and pads are water-resistant. We understand that pets collect snow and water from being outdoors. Our products are designed to be used safely with pets, even when the pet is water-soaked.

Please make sure to place the bed or pad in a relatively dry area such as a covered porch, garage, kennel or dog house. The bed or pad should not be placed where there is a potential for standing water from heavy rain and the product should not be immersed in water.

Can I place an outdoor heated bed or pad on the ceiling of a kennel in order to offer heat from above?

Our heated beds require direct contact with an animal’s body and do not provide radiant heat. For these reasons, we only recommend placing a heated bed or pad on the floor or sidewall where the dog’s body will come in direct contact with the product.

Is it safe to use this without the cover?

Yes, you can use K&H outdoor heated beds and pads with or without the included cover.

For a garage, would you advise an indoor or outdoor heated product?

For a garage, we recommend outdoor heated products. They have the features necessary to ensure your pet stays warm in even the coldest of temperatures.

If a pet urinates on a K&H heated bed or pad, will it suffer any harm from the electricity on the mat? Our pet has an incontinence problem.

If your pet urinates on a K&H heated bed or pad, he/she will not suffer any harm.

Print Friendly, PDF & Email
Please follow and like us:
error